/*
Title: Edit Library v1.1
Group: Introduction
This library is designed for use on the standard edit control.
Group: Issues/Consideration
A few considerations...
- Although many of the functions work on all types of edit
controls -- single-line, multiline, and combo boxes (contains a single-line
edit control) -- there are several functions that only work on one type of
edit control. See the documentation for each function for more information.
- AutoHotkey supports the creation and manipulation of the standard edit
control. For this reason, there are a small number functions that were
intentionally left out of this library because they provide no additional
value to what the standard AutoHotkey commands provide.
- The edit control does not support several key messages that are needed by
this library. Absent messages include EM_GETSELTEXT, EM_GETTEXTRANGE, and
EM_FINDTEXT. These messages have been replaced with AutoHotkey commands or
with other messages. Although the substitute code/messages are very
capable, they are not quite as efficient (memory and/or speed) as the
messages they replace (if they existed). These inefficiencies are not
really noticable if the control only contains a limited amount of text
(~512K or less), but they become more pronounced with increasing text sizes.
Efficiency also depends on the where work in the control is being done. For
example, extracting text from the top of the control uses less resources
that extracting text from the end of the control.
Group: Credit
This library was inspired by the Edit mini-library created by *Lexikos* and
the HiEditor library created by *majkinetor*. Some of the syntax and code
ideas were extracted from these libraries. Thank to these authors for
sharing their work.
Group: Functions
*/
;-----------------------------
;
; Function: Edit_CanUndo
;
; Description:
;
; Returns TRUE if there are any actions in the edit control's undo queue,
; otherwise FALSE.
;
;
;-------------------------------------------------------------------------------
Edit_CanUndo(hEdit)
{
Static EM_CANUNDO:=0xC6
SendMessage EM_CANUNDO,0,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_CharFromPos
;
; Description:
;
; Gets information about the character and/or line closest to a specified
; point in the the client area of the edit control.
;
;
; Parameters:
;
; X, Y - The coordinates of a point in the edit control's client area
; relative to the upper-left corner of the client area.
;
; r_CharPos - The zero-based index of the character nearest the specified
; point. [Optional] This index is relative to the beginning of the
; control, not the beginning of the line. If the specified point is beyond
; the last character in the edit control, the return value indicates the
; last character in the control. See the Remarks section for more
; information.
;
; r_LineIdx - Zero-based index of the line that contains the character.
; [Optional] For single-line edit controls, this value is zero. The index
; indicates the line delimiter if the specified point is beyond the last
; visible character in a line. See the Remarks section for more
; information.
;
;
; Returns:
;
; The value of the r_CharPos variable.
;
;
; Remarks:
;
; If the specified point is outside the bounds of the edit control, all output
; variables (Return, r_CharPos, and r_LineIdx) are set to -1.
;
;-------------------------------------------------------------------------------
Edit_CharFromPos(hEdit,X,Y,ByRef r_CharPos="",ByRef r_LineIdx="")
{
Static EM_CHARFROMPOS:=0xD7
SendMessage EM_CHARFROMPOS,0,(Y<<16)|X,,ahk_id %hEdit%
;-- Out of bounds?
if (ErrorLevel=0xFFFFFFFF)
{
r_CharPos:=-1
r_LineIdx:=-1
Return r_CharPos
}
;-- Extract values (UShort)
r_CharPos:=ErrorLevel & 0xFFFF ;-- LOWORD
r_LineIdx:=ErrorLevel>>16 ;-- HIWORD
;-- Convert to UInt using known UInt values as reference
FirstLine:=Edit_GetFirstVisibleLine(hEdit)-1
if (FirstLine>r_LineIdx)
r_LineIdx:=r_LineIdx+(65536*Floor((FirstLine+(65535-r_LineIdx))/65536))
FirstCharPos:=Edit_LineIndex(hEdit,FirstLine<0 ? 0:FirstLine)
if (FirstCharPos>r_CharPos)
r_CharPos:=r_CharPos+(65536*Floor((FirstCharPos+(65535-r_CharPos))/65536))
Return r_CharPos
}
;-----------------------------
;
; Function: Edit_Clear
;
; Description:
;
; Delete (clear) the current selection, if any, from the edit control.
;
;
; Remarks:
;
; Undo can be used to reverse this action.
;
;-------------------------------------------------------------------------------
Edit_Clear(hEdit)
{
Static WM_CLEAR:=0x303
SendMessage WM_CLEAR,0,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_Convert2DOS
;
; Description:
;
; Converts Unix, DOS/Unix mix, and Mac file formats to DOS format.
;
;-------------------------------------------------------------------------------
Edit_Convert2DOS(p_Text)
{
StringReplace p_Text,p_Text,`r`n,`n,All ;-- Convert DOS to Unix
StringReplace p_Text,p_Text,`r,`n,All ;-- Convert Mac to Unix
StringReplace p_Text,p_Text,`n,`r`n,All ;-- Convert Unix to DOS
Return p_Text
}
;-----------------------------
;
; Function: Edit_Convert2Mac
;
; Description:
;
; Convert DOS, DOS/Unix mix, and Unix file formats to Mac format.
;
;-------------------------------------------------------------------------------
Edit_Convert2Mac(p_Text)
{
StringReplace p_Text,p_Text,`r`n,`r,All ;-- Convert DOS to Mac
StringReplace p_Text,p_Text,`n,`r,All ;-- Convert Unix to Mac
if StrLen(p_Text)
if p_Text not Contains `r
p_Text .= "`r"
Return p_Text
}
;-----------------------------
;
; Function: Edit_Convert2Unix
;
; Description:
;
; Convert DOS, DOS/Unix mix, and Mac formats to Unix format.
;
;-------------------------------------------------------------------------------
Edit_Convert2Unix(p_Text)
{
StringReplace p_Text,p_Text,`r`n,`n,All ;-- Convert DOS to Unix
StringReplace p_Text,p_Text,`r,`n,All ;-- Convert Mac to Unix
if StrLen(p_Text)
if p_Text not Contains `n
p_Text .= "`n"
Return p_Text
}
;-----------------------------
;
; Function: Edit_ConvertCase
;
; Description:
;
; Convert case of selected text.
;
;
; Parameters:
;
; p_Case - Set to "Upper", "Lower", "Capitalize", or "Toggle".
;
;-------------------------------------------------------------------------------
Edit_ConvertCase(hEdit,p_Case)
{
;-- Collect current select postions
Edit_GetSel(hEdit,l_StartSelPos,l_EndSelPos)
if (l_StartSelPos=l_EndSelPos) ;-- Nothing selected
Return
;-- Collect selected text
l_SelectedText:=Edit_GetSelText(hEdit)
if l_SelectedText is Space
Return
;-- Convert
if p_Case in U,Upper,Uppercase
StringUpper l_SelectedText,l_SelectedText
else
if p_Case in L,Lower,Lowercase
StringLower l_SelectedText,l_SelectedText
else
if p_Case in C,Capitalize,Title,TitleCase
StringLower l_SelectedText,l_SelectedText,T
else
if p_Case in T,Toggle,ToggleCase,I,Invert,InvertCase
{
t_SelectedText=
Loop Parse,l_SelectedText
{
t_Char:=A_LoopField
l_Asc:=Asc(t_Char)
if l_Asc between 65 and 90
t_Char:=Chr(l_Asc+32)
else
if l_Asc between 97 and 122
t_Char:=Chr(l_Asc-32)
t_SelectedText .= t_Char
}
l_SelectedText:=t_SelectedText
}
;-- Replace selected text with converted text
Edit_ReplaceSel(hEdit,l_SelectedText)
;-- Reselect to the user's original positions
Edit_SetSel(hEdit,l_StartSelPos,l_EndSelPos)
}
;-----------------------------
;
; Function: Edit_Copy
;
; Description:
;
; Copy the current selection to the clipboard in CF_TEXT format.
;
;-------------------------------------------------------------------------------
Edit_Copy(hEdit)
{
Static WM_COPY:=0x301
SendMessage WM_COPY,0,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_Cut
;
; Description:
;
; Delete the current selection, if any, and copy the deleted text to the
; clipboard in CF_TEXT format.
;
;-------------------------------------------------------------------------------
Edit_Cut(hEdit)
{
Static WM_CUT:=0x300
SendMessage WM_CUT,0,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_EmptyUndoBuffer
;
; Description:
;
; Resets the undo flag of the edit control. The undo flag is set whenever an
; operation within the edit control can be undone.
;
;-------------------------------------------------------------------------------
Edit_EmptyUndoBuffer(hEdit)
{
Static EM_EMPTYUNDOBUFFER:=0xCD
SendMessage EM_EMPTYUNDOBUFFER,0,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_FindText
;
; Description:
;
; Find text within the edit control.
;
;
; Parameters:
;
; p_SearchText - Search text.
;
; p_Min, p_Max - Zero-based search range within the edit control. p_Min is
; the character index of the first character in the range and p_Max is the
; character index immediately following the last character in the range.
; (Ex: To search the first 5 characters of the text, set p_Min to 0 and
; p_Max to 5) Set p_Max to -1 to search to the end of the text. To search
; backward, the roles and descriptions of the p_Min and p_Max are
; reversed. (Ex: To search the first 5 characters of the control in
; reverse, set p_Min to 5 and p_Max to 0)
;
; p_Flags - Valid flags are as follows:
;
; (Start code)
; Flag Description
; ---- -----------
; MatchCase Search is case sensitive. This flag is ignored if the
; "RegEx" flag is also defined.
;
; RegEx Regular expression search.
;
; Static [Advanced feature]
; Text collected from the edit control remains in memory is
; used to satisfy the search request. The text remains in
; memory until the "Reset" flag is used or until the
; "Static" flag is not used.
;
; Advantages: Search time is reduced 10 to 60 percent
; (or more) depending on the size of the text in the control.
; There is no speed increase on the first use of the "Static"
; flag.
;
; Disadvantages: Any changes in the edit control are not
; reflected in the search.
;
; Bottom line: Don't use this flag unless performing multiple
; search requests on a control that will not be modified
; while searching.
;
;
; Reset [Advanced feature]
; Clears the saved text created by the "Static" flag so that
; the next use of the "Static" flag will get the text directly
; from the edit control. To clear the saved memory without
; performing a search, use the following syntax:
;
; Edit_FindText("","",0,0,"Reset")
; (end)
;
;
; r_RegExOutput - Variable that contains the part of the source text that
; matched the RegEx pattern. [Optional]
;
;
; Returns:
;
; Zero-based character index of the first character of the match or -1 if
; no match is found.
;
;
; Programming Notes:
;
; Searching using regular expressions (RegEx) can produce results that have a
; dynamic number of characters. For this reason, searching for the "next"
; pattern (forward or backward) may produce different results from developer
; developer depending on how values of p_Min and p_Max are determined.
;
;-------------------------------------------------------------------------------
Edit_FindText(hEdit,p_SearchText,p_Min=0,p_Max=-1,p_Flags="",ByRef r_RegExOut="")
{
Static s_Text
;-- Initialize
r_RegExOut:=""
if InStr(p_Flags,"Reset")
s_Text:=""
;-- Anything to search?
if StrLen(p_SearchText)=0
Return -1
l_MaxLen:=Edit_GetTextLength(hEdit)
if (l_MaxLen=0)
Return -1
;-- Parameters
if (p_Min<0 or p_Max>l_MaxLen)
p_Min:=l_MaxLen
if (p_Max<0 or p_Max>l_MaxLen)
p_Max:=l_MaxLen
;-- Anything to search?
if (p_Min=p_Max)
Return -1
;-- Get text
if InStr(p_Flags,"Static")
{
if StrLen(s_Text)=0
s_Text:=Edit_GetText(hEdit)
l_Text:=SubStr(s_Text,(p_Max>p_Min) ? p_Min+1:p_Max+1,(p_Max>p_Min) ? p_Max:p_Min)
}
else
{
s_Text:=""
l_Text:=Edit_GetTextRange(hEdit,(p_Max>p_Min) ? p_Min:p_Max,(p_Max>p_Min) ? p_Max:p_Min)
}
;-- Look for it
if InStr(p_Flags,"RegEx")=0 ;-- Not RegEx
l_FoundPos:=InStr(l_Text,p_SearchText,InStr(p_Flags,"MatchCase"),(p_Max>p_Min) ? 1:0)-1
else ;-- RegEx
{
p_SearchText:=RegExReplace(p_SearchText,"^P\)?","",1) ;-- Remove P or P)
if (p_Max>p_Min) ;-- Search forward
{
l_FoundPos:=RegExMatch(l_Text,p_SearchText,r_RegExOut,1)-1
if ErrorLevel
{
outputdebug,
(ltrim join`s
Function: %A_ThisFunc% - RegExMatch error.
ErrorLevel=%ErrorLevel%
)
l_FoundPos:=-1
}
}
else ;-- Search backward
{
;-- Programming notes:
;
; - The first search begins from the user-defined minimum
; position. This will establish the true minimum position to
; begin search calculations. If nothing is found, no
; additional searching is necessary.
;
; - The RE_MinPos, RE_MaxPos, and RE_StartPos variables contain
; 1-based values.
;
RE_MinPos :=1
RE_MaxPos :=StrLen(l_Text)
RE_StartPos :=RE_MinPos
Saved_FoundPos:=-1
Saved_RegExOut:=""
loop
{
;-- Positional search. Last found match (if any) wins
l_FoundPos:=RegExMatch(l_Text,p_SearchText,r_RegExOut,RE_StartPos)-1
if ErrorLevel
{
outputdebug,
(ltrim join`s
Function: %A_ThisFunc% - RegExMatch error.
ErrorLevel=%ErrorLevel%
)
l_FoundPos:=-1
Break
}
;-- If found, update saved and RE_MinPos, else update RE_MaxPos
if (l_FoundPos>-1)
{
Saved_FoundPos:=l_FoundPos
Saved_RegExOut:=r_RegExOut
RE_MinPos :=l_FoundPos+2
}
else
RE_MaxPos:=RE_StartPos-1
;-- Are we done?
if (RE_MinPos>RE_MaxPos or RE_MinPos>StrLen(l_Text))
{
l_FoundPos:=Saved_FoundPos
r_RegExOut:=Saved_RegExOut
Break
}
;-- Calculate new start position
RE_StartPos:=RE_MinPos+Floor((RE_MaxPos-RE_MinPos)/2)
}
}
}
;-- Adjust FoundPos
if (l_FoundPos>-1)
l_FoundPos += (p_Max>p_Min) ? p_Min:p_Max
Return l_FoundPos
}
;--- Clears the saved text created by the "Static" flag.
Edit_FindTextReset()
{
Edit_FindText("","",0,0,"Reset")
}
;-----------------------------
;
; Function: Edit_FmtLines
;
; Description:
;
; Sets a flag that determines whether a multiline edit control includes soft
; line-break characters. A soft line break consists of two carriage returns
; and a line feed and is inserted at the end of a line that is broken because
; of word wrapping.
;
;
; Parameters:
;
; p_Flag - Set to TRUE to insert soft line-break characters characters, FALSE
; to removes them.
;
;
; Returns:
;
; The value of p_Flag.
;
;
; Remarks:
;
; This message has no effect on the display of the text within the edit
; control. It affects the buffer returned by the EM_GETHANDLE message and
; the text returned by the WM_GETTEXT message. Since the WM_GETTEXT message
; is used by other functions in this library, be sure to un-format the text as
; soon as possible. Example of use:
;
; (Start code)
; Edit_FmtLines(hEdit,True)
; FormattedText:=Edit_GetText(hEdit)
; Edit_FmtLines(hEdit,False)
; (end)
;
;-------------------------------------------------------------------------------
Edit_FmtLines(hEdit,p_Flag)
{
Static EM_FMTLINES:=0xC8
SendMessage EM_FMTLINES,p_Flag,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_GetFirstVisibleLine
;
; Description:
;
; Returns the zero-based index of the uppermost visible line. For single-line
; edit controls, the return value is the zero-based index of the first visible
; character.
;
;-------------------------------------------------------------------------------
Edit_GetFirstVisibleLine(hEdit)
{
Static EM_GETFIRSTVISIBLELINE:=0xCE
SendMessage EM_GETFIRSTVISIBLELINE,0,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_GetLastVisibleLine
;
; Description:
;
; Returns the zero-based line index of the last visible line on the edit
; control.
;
;
; Remarks:
;
; To calculate the total number of visible lines, use the following...
;
; (start code)
; Edit_GetLastVisibleLine(hEdit) - Edit_GetFirstVisibleLine(hEdit) + 1
; (end)
;
;-------------------------------------------------------------------------------
Edit_GetLastVisibleLine(hEdit)
{
Edit_GetRect(hEdit,Left,Top,Right,Bottom)
Return Edit_LineFromPos(hEdit,0,Bottom-1)
}
;-----------------------------
;
; Function: Edit_GetLimitText
;
; Description:
;
; Returns the current text limit for the edit control.
;
;
; Remarks:
;
; Windows NT+: The maximum text length is 0x7FFFFFFE characters for
; single-line edit controls and -1 for multiline edit controls.
;
;-------------------------------------------------------------------------------
Edit_GetLimitText(hEdit)
{
Static EM_GETLIMITTEXT:=0xD5
SendMessage EM_GETLIMITTEXT,0,0,,ahk_id %hEdit%
Return ErrorLevel<<32>>32
}
;-----------------------------
;
; Function: Edit_GetLine
;
; Description:
;
; Get the text of the desired line from the edit control.
;
;
; Parameters:
;
; p_LineIdx - The zero-based index of the line to retrieve. [Optional] Use
; -1 (the default) to get the current line. This parameter is ignored if
; used for a single-line edit control.
;
; p_Length - Length of the line or length of the text to be extracted.
; [Optional] Use -1 (the default) to automatically determine the length
; of the line.
;
;
; Returns:
;
; The text of the specified line. The return value is an empty string if the
; line number specified by the p_LineIdx parameter is greater than the number
; of lines in the Edit control.
;
;-------------------------------------------------------------------------------
Edit_GetLine(hEdit,p_LineIdx=-1,p_Length=-1)
{
Static EM_GETLINE:=0xC4
if (p_LineIdx<0)
p_LineIdx:=Edit_LineFromChar(hEdit,Edit_LineIndex(hEdit))
if (p_Length>-1)
l_Length:=p_Length
else
l_Length:=Edit_LineLength(hEdit,p_LineIdx)
if l_Length=0
Return
VarSetCapacity(l_Text,l_Length=1 ? 2:l_Length,0)
NumPut(l_Length=1 ? 2:l_Length,l_Text,0,"UShort")
SendMessage EM_GETLINE,p_LineIdx,&l_Text,,ahk_id %hEdit%
Return l_Length=1 ? SubStr(l_Text,1,1):l_Text
}
;-----------------------------
;
; Function: Edit_GetLineCount
;
; Description:
;
; Returns an integer specifying the total number of text lines in a multiline
; edit control. If the control has no text, the return value is 1. The
; return value will never be less than 1.
;
;
; Remarks:
;
; The value returned is for the number of lines in the edit control. Very long
; lines (>1024) or word wrap may introduce additional lines to the control.
;
;-------------------------------------------------------------------------------
Edit_GetLineCount(hEdit)
{
Static EM_GETLINECOUNT:=0xBA
SendMessage EM_GETLINECOUNT,0,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_GetMargins
;
; Description:
;
; Gets the widths of the left and right margins for the edit control. If
; defined, these values are returned in the r_LeftMargin and r_RightMargin
; variables.
;
;
; Parameters:
;
; r_LeftMargin - Left margin, in pixels. [Optional]
; r_RightMargin - Right margin, in pixels. [Optional]
;
;
; Returns:
;
; The edit control's left margin
;
;-------------------------------------------------------------------------------
Edit_GetMargins(hEdit,ByRef r_LeftMargin="",ByRef r_RightMargin="")
{
Static EM_GETMARGINS:=0xD4
SendMessage EM_GETMARGINS,0,0,,ahk_id %hEdit%
r_LeftMargin :=ErrorLevel & 0xFFFF ;-- LOWORD of result
r_RightMargin:=ErrorLevel>>16 ;-- HIWORD of result
Return r_LeftMargin ; ##### --------------------------------------- Really?
}
;-----------------------------
;
; Function: Edit_GetModify
;
; Description:
;
; Gets the state of the edit control's modification flag. The flag indicates
; whether the contents of the edit control have been modified. Returns TRUE
; if the control has been modified, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_GetModify(hEdit)
{
Static EM_GETMODIFY:=0xB8
SendMessage EM_GETMODIFY,0,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_GetRect
;
; Description:
;
; Gets the formatting rectangle of the edit control.
;
;
; Parameters:
;
; r_Left..r_Bottom - Output variables. [Optional]
;
;
; Returns:
;
; Space separated rectangle.
;
;-------------------------------------------------------------------------------
Edit_GetRect(hEdit,ByRef r_Left="",ByRef r_Top="",ByRef r_Right="",ByRef r_Bottom="")
{
Static EM_GETRECT:=0xB2
VarSetCapacity(RECT_Structure,16,0)
SendMessage EM_GETRECT,0,&RECT_Structure,,ahk_id %hEdit%
r_Left :=NumGet(RECT_Structure,0,"Int")
r_Top :=NumGet(RECT_Structure,4,"Int")
r_Right :=NumGet(RECT_Structure,8,"Int")
r_Bottom:=NumGet(RECT_Structure,12,"Int")
Return r_Left . A_Space . r_Top . A_Space . r_Right . A_Space . r_Bottom
}
;-----------------------------
;
; Function: Edit_GetSel
;
; Description:
;
; Gets the starting and ending character positions of the current selection in
; the edit control. If defined, these values are returned in
; the r_StartSelPos and r_EndSelPos variables.
;
;
; Parameters:
;
; r_StartSelPos - Starting position of the selection. [Optional]
; r_EndSelPos - Ending position of the selection. [Optional]
;
;
; Returns:
;
; Starting position of the selection.
;
;-------------------------------------------------------------------------------
Edit_GetSel(hEdit,ByRef r_StartSelPos="",ByRef r_EndSelPos="")
{
Static EM_GETSEL:=0xB0
VarSetCapacity(l_StartSelPos,4,0)
VarSetCapacity(l_EndSelPos,4,0)
SendMessage EM_GETSEL,&l_StartSelPos,&l_EndSelPos,,ahk_id %hEdit%
r_StartSelPos:=NumGet(l_StartSelPos)
r_EndSelPos :=NumGet(l_EndSelPos)
Return r_StartSelPos
}
;-----------------------------
;
; Function: Edit_GetSelText
;
; Description:
;
; Returns the currently selected text (if any).
;
;
; Remarks:
;
; Since the edit control does not support the EM_GETSELTEXT message, the
; EM_GETLINE (if the selection is on one line) and the WM_GETTEXT messages are
; used instead.
;
;-------------------------------------------------------------------------------
Edit_GetSelText(hEdit)
{
Edit_GetSel(hEdit,l_StartSelPos,l_EndSelPos)
if (l_StartSelPos=l_EndSelPos)
Return
;-- Get line indexes of the selection
l_FirstSelectedLine:=Edit_LineFromChar(hEdit,l_StartSelPos)
l_LastSelectedLine :=Edit_LineFromChar(hEdit,l_EndSelPos)
;-- Get selected text
l_FirstPos:=Edit_LineIndex(hEdit,l_FirstSelectedLine)
if (l_FirstSelectedLine=l_LastSelectedLine)
and (l_EndSelPos<=l_FirstPos+Edit_LineLength(hEdit,l_FirstSelectedLine))
Return SubStr(Edit_GetLine(hEdit,l_FirstSelectedLine,l_EndSelPos-l_FirstPos),l_StartSelPos-l_FirstPos+1)
else
Return SubStr(Edit_GetText(hEdit,l_EndSelPos),l_StartSelPos+1)
}
;-----------------------------
;
; Function: Edit_GetText
;
; Description:
;
; Returns all text from the control up to p_Length length. If p_Length=-1
; (the default), all text is returned.
;
;
; Remarks:
;
; This function is similar to the AutoHotkey *GUIControlGet* command (for AHK
; GUI's) and the *ControlGetText* command except that end-of-line (EOL)
; characters from the retrieved text are not automatically converted
; (CR+LF to LF). If needed, use the <Edit_Convert2Unix> function to convert
; the text to the AutoHotkey text format.
;
;-------------------------------------------------------------------------------
Edit_GetText(hEdit,p_Length=-1)
{
Static WM_GETTEXT:=0xD
if (p_Length<0)
p_Length:=Edit_GetTextLength(hEdit)
VarSetCapacity(l_Text,p_Length+1,0)
SendMessage WM_GETTEXT,p_Length+1,&l_Text,,ahk_id %hEdit%
return l_Text
}
;-----------------------------
;
; Function: Edit_GetTextLength
;
; Description:
;
; Returns the length, in characters, of the text in the edit control.
;
;-------------------------------------------------------------------------------
Edit_GetTextLength(hEdit)
{
Static WM_GETTEXTLENGTH:=0xE
SendMessage WM_GETTEXTLENGTH,0,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_GetTextRange
;
; Description:
;
; Get a range of characters.
;
;
; Parameters:
;
; p_Min - Character position index immediately preceding the first character
; in the range.
;
; p_Max - Character position immediately following the last character in the
; range. Set to -1 to indicate the end of the text.
;
;
; Remarks:
;
; Since the edit control does not support the EM_GETTEXTRANGE message, the
; <Edit_GetText> function (WM_GETTEXT message) is used to collect the desired
; range of characters.
;
;-------------------------------------------------------------------------------
Edit_GetTextRange(hEdit,p_Min=0,p_Max=-1)
{
Return SubStr(Edit_GetText(hEdit,p_Max),p_Min+1)
}
;-----------------------------
;
; Function: Edit_IsMultiline
;
; Description:
;
; Returns TRUE if the edit control is multiline, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_IsMultiline(hEdit)
{
Static ES_MULTILINE:=0x4
Return Edit_IsStyle(hEdit,ES_MULTILINE)
}
;-----------------------------
;
; Function: Edit_IsReadOnly
;
; Description:
;
; Returns TRUE if the ES_READONLY style has been set, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_IsReadOnly(hEdit)
{
Static ES_READONLY:=0x800
Return Edit_IsStyle(hEdit,ES_READONLY)
}
;-----------------------------
;
; Function: Edit_IsStyle
;
; Description:
;
; Returns TRUE if the specified style has been set, otherwise FALSE.
;
;
; Parameters:
;
; p_Style - Style of the edit control.
;
; Some common edit control styles...
;
; (start code)
; ES_LEFT :=0x0 ;-- Can't actually check this style. It's the lack of ES_CENTER or ES_RIGHT.
; ES_CENTER :=0x1
; ES_RIGHT :=0x2
; ES_MULTILINE :=0x4
; ES_UPPERCASE :=0x8
; ES_LOWERCASE :=0x10
; ES_PASSWORD :=0x20 ;-- Single-line edit control only
; ES_AUTOVSCROLL:=0x40
; ES_AUTOHSCROLL:=0x80
; ES_NOHIDESEL :=0x100
; ES_COMBO :=0x200
; ES_OEMCONVERT :=0x400
; ES_READONLY :=0x800
; ES_WANTRETURN :=0x1000
; ES_NUMBER :=0x2000
; WS_TABSTOP :=0x10000
; WS_HSCROLL :=0x100000
; WS_VSCROLL :=0x200000
; (end)
;
;-------------------------------------------------------------------------------
Edit_IsStyle(hEdit,p_Style)
{
Static GWL_STYLE:=-16
ControlGet l_Style,Style,,,ahk_id %hEdit%
;;;;; l_Style:=DllCall("GetWindowLong","UInt",hEdit,"Int",GWL_STYLE)
Return l_Style & p_Style ? True:False
}
;-----------------------------
;
; Function: Edit_SetStyle
;
; Description:
;
; Adds, removes, or toggles a style for an edit control.
;
;
; Parameters:
;
; p_Style - Style to set.
;
; p_Option - Use "+" (the default) to add, "-" to remove, and "^" to toggle.
;
;
; Returns:
;
; TRUE if the request completed successfully, otherwise FALSE.
;
;
; Remarks:
;
; Styles that can be modified after the edit control has been created include
; the following:
;
; (start code)
; ES_UPPERCASE :=0x8
; ES_LOWERCASE :=0x10
; ES_PASSWORD :=0x20 ;-- Use the Edit_SetPasswordChar function
; ES_OEMCONVERT :=0x400
; ES_READONLY :=0x800 ;-- Use the Edit_SetReadOnly function
; ES_WANTRETURN :=0x1000
; ES_NUMBER :=0x2000
; (end)
;
; Use the <Edit_IsStyle> function to determine if a style is currently set.
;
;-------------------------------------------------------------------------------
Edit_SetStyle(hEdit,p_Style,p_Option="+")
{
Control Style,%p_Option%%p_Style%,,ahk_id %hEdit%
Return ErrorLevel ? False:True
}
;-----------------------------
;
; Function: Edit_LineFromChar
;
; Description:
;
; Gets the index of the line that contains the specified character index.
;
;
; Parameters:
;
; p_CharPos - The character index of the character contained in the line
; whose number is to be retrieved. [Optional] If 1 (the default), the
; function retrieves either the line number of the current line (the line
; containing the caret) or, if there is a selection, the line number of
; the line containing the beginning of the selection.
;
;
; Returns:
;
; The zero-based line number of the line containing the character index
; specified by p_CharPos.
;
;-------------------------------------------------------------------------------
Edit_LineFromChar(hEdit,p_CharPos=-1)
{
Static EM_LINEFROMCHAR:=0xC9
SendMessage EM_LINEFROMCHAR,p_CharPos,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_LineFromPos
;
; Description:
;
; This function is the same as <Edit_CharFromPos> except the line index
; (r_LineIdx) is returned.
;
;-------------------------------------------------------------------------------
Edit_LineFromPos(hEdit,X,Y,ByRef r_CharPos="",ByRef r_LineIdx="")
{
Edit_CharFromPos(hEdit,X,Y,r_CharPos,r_LineIdx)
Return r_LineIdx
}
;-----------------------------
;
; Function: Edit_LineIndex
;
; Description:
;
; Gets the character index of the first character of a specified line.
;
;
; Parameters:
;
; p_LineIdx - Zero-based line number. [Optional] Use -1 (the default) for the
; current line.
;
;
; Returns:
;
; The character index of the specified line or -1 if the specified line is
; greater than the total number of lines in the edit control.
;
;-------------------------------------------------------------------------------
Edit_LineIndex(hedit,p_LineIdx=-1)
{
Static EM_LINEINDEX:=0xBB
SendMessage EM_LINEINDEX,p_LineIdx,0,,ahk_id %hEdit%
Return ErrorLevel<<32>>32
}
;-----------------------------
;
; Function: Edit_LineLength
;
; Description:
;
; Gets the length of a line.
;
;
; Parameters:
;
; p_LineIdx - The zero-based line index of the desired line. Use -1
; (the default) for the current line.
;
;
; Returns:
;
; The length, in characters, of the specified line. If p_LineIndex is greater
; than the total number of lines in the edit control, the length of the last
; (or only) line is returned.
;
;-------------------------------------------------------------------------------
Edit_LineLength(hEdit,p_LineIdx=-1)
{
Static EM_LINELENGTH:=0xC1
l_CharPos:=Edit_LineIndex(hEdit,p_LineIdx)
if (l_CharPos<0) ;-- Invalid p_LineIdx
l_CharPos:=Edit_LineIndex(hEdit,Edit_GetTextLength(hEdit)-1)
SendMessage EM_LINELENGTH,l_CharPos,0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_LineScroll
;
; Description:
;
; Scrolls the text in the edit control for the current file.
;
;
; Parameters:
;
; xScroll - The number of characters to scroll horizontally. Use a negative
; number to scroll to the left and a positive number to scroll to the
; right.
;
; yScroll - The number of lines to scroll vertically. Use a negative number
; to scroll up and a positive number to scroll down.
;
;
; Returns:
;
; TRUE if sent to a multiline edit control, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_LineScroll(hEdit,xScroll=0,yScroll=0)
{
Static EM_LINESCROLL:=0xB6
SendMessage EM_LINESCROLL,xScroll,yScroll,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_LoadFile
;
; Description:
;
; Load the contents of a file to the edit control.
;
;
; Parameters:
;
; p_FileName - The full path and name of the file.
;
; p_Convert2DOS - If TRUE, the text will be converted from Unix, DOS/Unix mix,
; or Mac format, to DOS format before it is loaded to the edit control.
; [Optional]
;
; r_FileFormat - Contains the file format variable. [Optional] This variable
; is set to the file format of loaded file - "DOS", "Unix", or "Mac".
; This information is useful if the contents of the edit control will be
; be converted back to the original file format when the file is saved.
;
;
; Returns:
;
; TRUE if successful, otherwise FALSE.
;
;
; Remarks:
;
; This request will replace the entire edit control with the contents of the
; the requested file. Consequently, the Undo buffer is flushed.
;
;-------------------------------------------------------------------------------
Edit_LoadFile(hEdit,p_FileName,p_Convert2DOS=False,ByRef r_FileFormat="")
{
IfNotExist %p_FileName%
{
outputdebug Function: %A_ThiSFunc% - File "%p_FileName%" not found
Return False
}
;-- Load contents of file into variable
FileRead l_Text,%p_FileName%
if ErrorLevel
{
outputdebug Function: %A_ThiSFunc% - Unable to read from "%p_FileName%"
Return False
}
;-- Determine file format
if l_Text Contains `r`n
{
r_FileFormat:="DOS"
outputdebug DOS file format detected
}
else
if l_Text Contains `n
{
r_FileFormat:="UNIX"
outputdebug Unix file format detected
}
else
if l_Text Contains `r
{
r_FileFormat:="MAC"
outputdebug Mac file format detected
}
else
{
r_FileFormat:="DOS"
outputdebug NO EOL character detected. DOS file format assumed.
}
;-- Convert file format?
if p_Convert2DOS
l_Text:=Edit_Convert2DOS(l_Text)
;-- Load text to edit control
Return Edit_SetText(hEdit,l_Text)
}
;-----------------------------
;
; Function: Edit_Paste
;
; Description:
;
; Copies the current content of the clipboard to the edit control at the
; current caret position. Data is inserted only if the clipboard contains
; data in CF_TEXT format.
;
;-------------------------------------------------------------------------------
Edit_Paste(hEdit)
{
Static WM_PASTE:=0x302
SendMessage WM_PASTE,0,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_PosFromChar
;
; Description:
;
; Gets the client area coordinates of a specified character in the edit
; control.
;
;
; Parameters:
;
; p_CharPos - The zero-based index of the character.
;
; X, Y - These parameters, which must contain valid variable names, are used
; to return the x/y-coordinates of a point in the Edit control's client
; relative to the upper-left corner of the client area.
;
;
; Remarks:
;
; If p_CharPos is greater than the index of the last character in the
; control, the returned coordinates are of the position just past the last
; character of the control.
;
;-------------------------------------------------------------------------------
Edit_PosFromChar(hEdit,p_CharPos,ByRef X,ByRef Y)
{
Static EM_POSFROMCHAR:=0xD6
SendMessage EM_POSFROMCHAR,p_CharPos,0,,ahk_id %hEdit%
X:=(ErrorLevel & 0xFFFF)<<48>>48
;-- LOWORD of result and converted from UShort to Short
Y:=(ErrorLevel>>16)<<48>>48
;-- HIWORD of result and converted from UShort to Short
}
;-----------------------------
;
; Function: Edit_ReplaceSel
;
; Description:
;
; Replaces the selected text with the specified text. If there is no
; selection, the replacement text is inserted at the caret.
;
;
; Parameters:
;
; p_Text - Text to replace selection with.
; p_CanUndo - If TRUE (the default), replace can be undone.
;
;-------------------------------------------------------------------------------
Edit_ReplaceSel(hEdit,p_Text="",p_CanUndo=True)
{
Static EM_REPLACESEL:=0xC2
SendMessage EM_REPLACESEL,p_CanUndo,&p_Text,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_SaveFile
;
; Description:
;
; Save the contents of the edit control to a file. If the file does not
; exist, it will be created.
;
;
; Parameters:
;
; p_FileName - The full path and name of the file.
;
; p_Convert - Convert file format. [Optional] Set to "M" or "Mac" to convert
; to Mac. Set to "U" or "Unix" to convert to Unix.
;
;
; Returns:
;
; TRUE if successful, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_SaveFile(hEdit,p_FileName,p_Convert="")
{
;-- Delete if file exists
IfExist %p_FileName%
{
FileDelete %p_FileName%
if ErrorLevel
{
outputdebug Function: %A_ThisFunc% - Unable to delete "%p_FileName%"
Return False
}
}
;-- Get text
l_Text:=Edit_GetText(hEdit)
;-- If requested, convert file format
if p_Convert in M,Mac
l_Text:=Edit_Convert2Mac(l_Text)
if p_Convert in U,Unix
l_Text:=Edit_Convert2Unix(l_Text)
;-- Save it
FileAppend %l_Text%,*%p_FileName% ;-- Save in binary mode
if ErrorLevel
{
outputdebug Function: %A_ThisFunc% - Unable to save to "%p_FileName%"
Return False
}
Return True
}
;-----------------------------
;
; Function: Edit_Scroll
;
; Description:
;
; Scrolls the text vertically in the edit control.
;
;
; Parameters:
;
; p_Pages - The number of pages to scroll. Use a negative number to scroll up
; and a positive number to scroll down.
;
; p_Lines - The number of lines to scroll. Use a negative number to scroll up
; and a positive number to scroll down.
;
;
; Returns:
;
; The number of lines that the command scrolls. The value will be negative if
; scrolling up and positive if scrolling down.
;
;-------------------------------------------------------------------------------
Edit_Scroll(hEdit,p_Pages=0,p_Lines=0)
{
Static EM_SCROLL :=0xB5
,SB_LINEUP :=0x0 ;-- Scroll up one line
,SB_LINEDOWN:=0x1 ;-- Scroll down one line
,SB_PAGEUP :=0x2 ;-- Scroll up one page
,SB_PAGEDOWN:=0x3 ;-- Scroll down one page
;-- Initialize
l_ScrollLines:=0
;-- Pages
Loop % Abs(p_Pages)
{
SendMessage EM_SCROLL,(p_Pages>0) ? SB_PAGEDOWN:SB_PAGEUP,0,,ahk_id %hEdit%
if not ErrorLevel
Break
l_ScrollLines:=l_ScrollLines+((ErrorLevel & 0xFFFF)<<48>>48)
;-- LOWORD of result and converted from UShort to Short
}
;-- Lines
Loop % Abs(p_Lines)
{
SendMessage EM_SCROLL,(p_Lines>0) ? SB_LINEDOWN:SB_LINEUP,0,,ahk_id %hEdit%
if not ErrorLevel
Break
l_ScrollLines:=l_ScrollLines+((ErrorLevel & 0xFFFF)<<48>>48)
;-- LOWORD of result and converted from UShort to Short
}
Return l_ScrollLines
}
;-----------------------------
;
; Function: Edit_ScrollCaret
;
; Description:
;
; Scrolls the edit control until caret is visible.
;
;-------------------------------------------------------------------------------
Edit_ScrollCaret(hEdit)
{
Static EM_SCROLLCARET:=0xB7
SendMessage EM_SCROLLCARET,0,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_SetLimitText
;
; Description:
;
; Sets the text limit of the edit control.
;
;
; Parameters:
;
; p_Limit - The maximum number of characters the user can enter.
; Windows NT+: If this parameter is zero, the text length is set to
; 0x7FFFFFFE characters for single-line edit controls or 1 for multiline
; edit controls.
;
;
; Remarks:
;
; - This message limits only the text the user can enter. It does not affect any
; text already in the edit control when the message is sent, nor does it
; affect the length of the text copied to the edit control by the WM_SETTEXT
; message. For more information:
;
; <http://msdn.microsoft.com/en-us/library/bb761607(VS.85).aspx>
;
; - For AutoHotkey GUI's, use the +Limitnn and -Limit options.
;
; - Although this message can be sent to any edit control, not all programs will
; respond well to a limit change.
;
;-------------------------------------------------------------------------------
Edit_SetLimitText(hEdit,p_Limit)
{
Static EM_LIMITTEXT:=0xC5
SendMessage EM_LIMITTEXT,p_Limit,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_SetMargins
;
; Description:
;
; Sets the width of the left and/or right margin (in pixels) for the edit
; control. The message automatically redraws the control to reflect the new
; margins.
;
;
; Parameters:
;
; p_LeftMargin - Left margin, in pixels. If blank, the left margin is not set.
; Specify the EC_USEFONTINFO value (0xFFFF or 65535) to set the left
; margin to a narrow width calculated using the text metrics of the
; control's current font. If no font has been set for the control, the
; margin is set to zero.
;
; p_RightMargin - Right margin, in pixels. If blank, the right margin is not
; set. Specify the EC_USEFONTINFO value (0xFFFF or 65535) to set the
; right margin to a narrow width calculated using the text metrics of the
; control's current font. If no font has been set for the control, the
; margin is set to zero.
;
;-------------------------------------------------------------------------------
Edit_SetMargins(hEdit,p_LeftMargin="",p_RightMargin="")
{
Static EM_SETMARGINS :=0xD3
,EC_LEFTMARGIN :=0x1
,EC_RIGHTMARGIN:=0x2
,EC_USEFONTINFO:=0xFFFF
l_Margins:=0
l_Flags :=0
if p_LeftMargin is Integer
{
l_Flags |= EC_LEFTMARGIN
l_Margins |= p_LeftMargin ;-- LOWORD
}
if p_RightMargin is Integer
{
l_Flags |= EC_RIGHTMARGIN
l_Margins |= p_RightMargin<<16 ;-- HIWORD
}
if l_Flags
SendMessage EM_SETMARGINS,l_Flags,l_Margins,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_SetModify
;
; Description:
;
; Sets or clears the modification flag for the edit control. The modification
; flag indicates whether the text within the control has been modified.
;
;
; Parameters:
;
; p_Flag - Set to TRUE to set the modification flag. Set to FALSE to clear the
; modification flag.
;
;-------------------------------------------------------------------------------
Edit_SetModify(hEdit,p_Flag)
{
Static EM_SETMODIFY:=0xB9
SendMessage EM_SETMODIFY,p_Flag,0,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_SetPasswordChar
;
; Description:
;
; Sets or removes the password character for a single-line edit control.
;
;
; Parameters:
;
; p_Char - The character that is displayed in place of the characters typed by
; the user. [Optional] The default is an asterisk ("*"). Set to null
; ("") to remove the password character.
;
;
; Returns:
;
; Documented: This message does not return a value. Undocumented and/or does
; not apply to all OS versions: Returns TRUE if successful or "FAIL" if
; unsuccessful.
;
;
; Remarks:
;
; - This request adds or removes the ES_Password style to/from a single-line
; edit control. Use the <Edit_IsStyle> function to determine if the
; ES_PASSWORD style has been set.
;
; - Observation: On Windows 2000+, the ES_Password style cannot be removed once
; added unless the request is made from the same process that created the
; control.
;
; - For AutoHotkey GUI's, use the +Password and -Password options to add/remove
; ES_PASSWORD style unless a password character other than "*" is desired.
;
;-------------------------------------------------------------------------------
Edit_SetPasswordChar(hEdit,p_Char="*")
{
Static EM_SETPASSWORDCHAR:=0xCC
SendMessage EM_SETPASSWORDCHAR,Asc(p_Char),0,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_SetReadOnly
;
; Description:
;
; Sets or removes the read-only style (ES_READONLY) of the edit control.
;
;
; Parameters:
;
; p_Flag - Set to TRUE to add the ES_READONLY style. Set to FALSE to remove
; the ES_READONLY style.
;
;
; Returns:
;
; TRUE if successful, otherwise FALSE.
;
;
; Remarks:
;
; For AutoHotkey GUIs, this is same as using the +ReadOnly or -ReadOnly
; option when creating the Edit control or using the GUIControl command after
; the edit control has been created. For example:
;
; (start code)
; GUIControl +ReadOnly,Edit1
; (end code)
;
;-------------------------------------------------------------------------------
Edit_SetReadOnly(hEdit,p_Flag)
{
Static EM_SETREADONLY:=0xCF
SendMessage EM_SETREADONLY,p_Flag,0,,ahk_id %hEdit%
Return ErrorLevel ? True:False
}
;-----------------------------
;
; Function: Edit_SetRect
;
; Description:
;
; Sets the formatting rectangle of a multiline edit control. The formatting
; rectangle is the limiting rectangle into which the control draws the text.
; The limiting rectangle is independent of the size of the edit control
; window.
;
;
; Parameters:
;
; p_Left..p_Bottom - Coordinates.
;
;
; Remarks:
;
; Advanced feature. For additional information, see the following...
;
; <http://msdn.microsoft.com/en-us/library/bb761657(VS.85).aspx>
;
;-------------------------------------------------------------------------------
Edit_SetRect(hEdit,p_Left,p_Top,p_Right,p_Bottom)
{
Static EM_SETRECT:=0xB3
VarSetCapacity(RECT_Structure,16,0)
NumPut(p_Left, RECT_Structure,0,"Int")
NumPut(p_Top, RECT_Structure,4,"Int")
NumPut(p_Right, RECT_Structure,8,"Int")
NumPut(p_Bottom,RECT_Structure,12,"Int")
SendMessage EM_SETRECT,0,&RECT_Structure,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_SetTabStops
;
; Description:
;
; Sets the tab stops in a multiline edit control. When text is copied to the
; control, any tab character in the text causes space to be generated up to
; the next tab stop.
;
;
; Parameters:
;
; p_NbrOfTabStops - Number of tab stops. [Optional] Set to 0 (the default) to
; set the tab stops to the system default. Set to 1 to have all tab stops
; set to the value of the p_DTU parameter or 32 if p_DTU is not defined.
; Any value greater than 1 will set that number of tab stops.
;
; p_DTU - Dialog Template Units. [Optional] If p_NbrOfTabStops=0, this
; parameter is ignored. If this parameter contains a single value
; (Ex: 21), all tab stops will be set to a factor of this value
; (Ex: 21, 42, 63, etc.). Otherwise, this parameter should contain values
; for all requested tab stops each separated by a comma ","
; (Ex: "20,45,70,125").
;
;
; Returns:
;
; TRUE if all the tabs are set, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_SetTabStops(hEdit,p_NbrOfTabStops=0,p_DTU=32)
{
Static EM_SETTABSTOPS:=0xCB
VarSetCapacity(l_TabStops,p_NbrOfTabStops*4,0)
if p_DTU contains ,,
{
Loop Parse,p_DTU,`,,%A_Space%
if (A_Index<=p_NbrOfTabStops)
Numput(A_LoopField+0,l_TabStops,(A_Index-1)*4,"UInt")
}
else
Loop %p_NbrOfTabStops%
NumPut(p_DTU*A_Index,l_TabStops,(A_Index-1)*4,"UInt")
SendMessage EM_SETTABSTOPS,p_NbrOfTabStops,&l_TabStops,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_SetText
;
; Description:
;
; Set the text of the edit control. Returns TRUE if successful, otherwise
; FALSE.
;
;
; Remarks:
;
; - The system automatically resets the undo flag whenever an edit control
; receives a WM_SETTEXT message. Use the <Edit_SetSel> (select all) and
; <Edit_ReplaceSel> functions to populate the control if undo is desired.
;
; - This function is the same as the AutoHotkey *ControlSetText* command except
; there is no delay after the command has executed.
;
;-------------------------------------------------------------------------------
Edit_SetText(hEdit,p_Text)
{
Static WM_SETTEXT:=0xC
SendMessage WM_SETTEXT,0,&p_Text,,ahk_id %hEdit%
Return ErrorLevel
}
;-----------------------------
;
; Function: Edit_SetSel
;
; Description:
;
; Selects a range of characters.
;
;
; Parameters:
;
; p_StartSelPos - Starting character position of the selection. If set to -1,
; the current selection (if any) will be deselected.
;
; p_EndSelPos - Ending character position of the selection. Set to -1 to use
; the position of the last character in the control.
;
;-------------------------------------------------------------------------------
Edit_SetSel(hEdit,p_StartSelPos=0,p_EndSelPos=-1)
{
Static EM_SETSEL:=0x0B1
SendMessage EM_SETSEL,p_StartSelPos,p_EndSelPos,,ahk_id %hEdit%
}
;-----------------------------
;
; Function: Edit_TextIsSelected
;
; Description:
;
; Returns TRUE if text is selected, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_TextIsSelected(hEdit)
{
Edit_GetSel(hEdit,l_StartSelPos,l_EndSelPos)
Return (l_StartSelPos<>l_EndSelPos)
}
;-----------------------------
;
; Function: Edit_Undo
;
; Description:
;
; Undo the last operation. Returns TRUE if the Undo operation succeeds,
; otherwise FALSE.
;
;
; Returns:
;
; For a single-line edit control, the return value is always TRUE. For a
; multiline edit control, the return value is TRUE if the undo operation is
; successful, otherwise FALSE.
;
;-------------------------------------------------------------------------------
Edit_Undo(hEdit)
{
Static EM_UNDO:=0xC7
SendMessage EM_UNDO,0,0,,ahk_id %hEdit%
Return ErrorLevel
}
;**************************
;* *
;* Helper functions *
;* *
;**************************
;-----------------------------
;
; Function: Edit_GetActiveHandles
;
; Description:
;
; Finds the handles for the active control and active window.
;
;
; Parameters:
;
; hEdit - Variable that contains the handle of the active edit control.
; [Optional] Value is zero if the active control is not an edit control.
;
; hWindow - Variable that contains the handle of the active window. [Optional]
;
; p_MsgBox - Display error message. [Optional] If TRUE, an error MsgBox is
; displayed if the active control is not an edit control.
;
;
; Returns:
;
; Handle of the active edit control or FALSE (0) if the active control is not
; an edit control.
;
;-------------------------------------------------------------------------------
Edit_GetActiveHandles(ByRef hEdit="",ByRef hWindow="",p_MsgBox=False)
{
WinGet hWindow,ID,A
ControlGetFocus l_Control,A
if SubStr(l_Control,1,4)="Edit"
{
ControlGet hEdit,hWnd,,%l_Control%,A
Return hEdit
}
if p_MsgBox
MsgBox
,262160
;-- 262160 = 0 (OK button) + 16 ("Error" icon) + 262144 (AOT)
,Error
,This request cannot be performed on this control. %A_Space%
Return False
}